Bunn COMBO BREWER Manuel de service télécharger pdf (Page 8)

Page 8

TEA BREWING

1. Begin each brew cycle with a clean empty tea funnel.

2. Insert a BUNN ﬁlter into the tea funnel (FIG 8A).

3. Pour fresh tea into the ﬁlter and level by gently shaking.

4. Slide the funnel into the funnel rails until it stops.

5. Place an empty server (customer supplied) under the funnel (FIG 8B).

6. Verify that the "ENABLE BREW ON/OFF" switch is on.

7. Momentarily press and release the "BREW B" switch. The display will read "BREWING".

8. After the tea ﬁnishes dripping from the funnel tip, carefully remove the brew funnel and discard the tea and

ﬁlter. Rinse funnel.

DO NOT REMOVE SERVER UNTIL DILUTION CYCLE IS COMPLETED!

FIG 8B

FIG 8A

40410 031314

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 22 23

Pas de commentaire

Bunn COMBO BREWER Manuel de service Page 8