Bunn AutoPOD Manuel de réparation télécharger pdf (Page 15)

Page 15

Location:

The vent valve is located inside the back access panel.

Function:

The vent valve closes (activates) only during hot water

dispense to pressurize tank.

Test Procedures:

1. With a voltmeter, check voltage across the termi-

nals of the vent valve. Activate valve in the "TEST

OUTPUTS" program mode. The indication must

be 12 vdc.

2. Coil resistance should be 28.8 ±10%.

RemovalandReplacement:

1. Disconnect the brewer from the power source.

2. Disconnect the connectors from solenoid.

3. Cut cable tie(s) securing solenoid.

4. Disconnect hose from solenoid.

5. Install in reverse order.

FIG.15-1VENTVALVE-MyCaféAP

FIG.15-2VENTVALVE-AutoPod

VENT VALVE

41169 120711

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 26 27

Pas de commentaire

Bunn AutoPOD Manuel de réparation Page 15