Bunn AutoPOD Manuel de réparation télécharger pdf (Page 22)

Page 22

EJECTOR ASSEMBLY

IndexMotorAssembly:

RemovalandReplacement:

MyCafé-AP ONLY

1. Press "OPEN/CLOSE" button to open pod door. If

you can not operate motor assembly, then manu-

ally move pod holder assembly out to the load

position.

2. Unplug brewer.

3. Remove top cover.

4. Loosen top Allen screw (farthest from motor).

FIG 21-1.

5. Remove plastic plug from ejector ﬂoor. Insert Al-

len wrench through hole and loosen bottom Allen

screw (farthest from motor). FIG 21-2.

6. Remove 2 nuts from motor mounting bracket.

FIG 21.3.

7. Remove motor assembly.

CONTINUED

FIG 21-2 Loosen bottom Allen screw.

FIG 21-1 Loosen top Allen screw.

FIG 21-3 Remove mounting nuts.

FIG 21-4 Motor removed.

41169 120711

Front removed for clarity.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Pas de commentaire

Bunn AutoPOD Manuel de réparation Page 22